 |
WDieTree
- This innovative W-Die Holder is designed to organize and store Burndy
W-Dies. Its straight forward design allows for easy insertion of the
W-Dies onto the holder, providing greater flexibility and secure storage.
Simply press the die button, insert the W-Dies and
release! |
|
 |
Burndy MD6
Has a permanent "5/8" nose and D3 groove jaw. Accepts the full
line of BURNDY "W" and "X" die inserts. Recommended
for use where space for tool jaw is limited.
|
|
|
Burndy
MD6-8 Has a permanent "O" & D3 groove jaw. Accepts the
full line of BURNDY "W" and "X" die inserts.
Recommended for use where space for tool jaw is limited.
|
 |
Burndy
MD7-8 Has a permanent "O" & D3 groove jaw. Accepts the
full line of BURNDY W VT, V RT, AND X die inserts. |
|
|
Burndy OH25
Installs service entrance splice connectors. Conductor range: #10
through 1/0. Easy, one hand crimping operation. The ratchet mechanism
provides for properly completed crimps every time before the tool can be
removed from the connection. It is designed to install 5/8" INSULINK
and LINKIT service entrance connectors with only one crimp per connector
end, speeding installation time. 5 year warranty.
|
|
|
Burndy
OUR840 The OUR840 allows easy, one hand crimping action. A five year
warranty. The ratchet mechanism provides for properly completed crimps
every time before the tool can be removed form the connection. It will
install 5/8" INSULINK and LINKIT service entrance connectors with
only one crimp per end. Tool operation is simple: A) Slip the tool over
the connector. B) The first few strokes grip the connector. C) Stroke
until automatic tool release signifies a completed compression.
|
|
THE
WEJTAP SYSTEM
|
 |
LPHY750
Kompressor 12 Ton hydraulic crimp tool, accepts U Dies. |
 |
LPHY46
Kompressor 15 Ton hydraulic crimp tool, accepts P-Dies or U-Dies with
an adapter. |
 |
NEW
PRODUCT! PATCUT245CUAL-18V Intended
for copper and aluminum cable only, the PATCUT245CUAL-18V is capable of
cutting up to 2.45 inches (outside diameter) of cable and has a larger
cutting capacity than another recently introduced battery actuated
hydraulic cutter, the PATCUT129. 18 volt system. |
 |
PAT81KFT-18V
6 Ton battery dieless crimp tool. 18 volt system. |
|
|
PAT600-18V
6 Ton Battery Crimp Tool. 18 volt system, accepts W Dies. |
 |
PAT644-18V
11 Ton Battery Crimp Tool. 18 volt system, dieless crimper. |
 |
PAT750C-18V
12 Ton Battery Crimp Tool. 18 volt system, accepts U Dies. |
 |
HIW-716
Hydraulic Impact Wrench. |
 |
LPHT-BIT
9/16", 11/16", 13/16", 15/16", 1-1/16" bits in
18" or 24". |
|
|
Burndy
Steel Die Case MD6 and MD7 Compact Steel Die Case
|
