|
The V-Watch™ Personal Voltage Detector detects
the presence of electric fields surrounding electrical equipment.
Compactly designed to be worn on the outside of clothing or other
protective gear, V-Watch™ provides an extra level of safety for workers
who may be in danger of accidentally contacting electrical power lines and
other energized electrical equipment. |
The Quick-Check Transformer and Capacitor Tester is
a versatile tool for quick and easy checks of capacitors, transformers and
the connections made to them. In the field, the Quick-Check is used to
test the primary and secondary sides of single- or three-phase transformer
installations for short circuits prior to energizing. In the shop, the
Quick-Check is used for the quick screening of incoming and outgoing
transformers for both primary and secondary shorts or opens (including
internal fuses and breakers). The Quick-Check also tests capacitors and
capacitor banks. |
The TAG-5000 Wireless Phaser
provides a unique method of phasing across a single-phase or three-phase
system to make certain that correct polarity has been established prior
to "closing-in" a switch. The TAG-5000 consists of two units,
a transmitter and receiver, which communicate via a radio frequency
signal, thus eliminating the need for a connecting cord found on
traditional phasing sets.
|
The MARK series of analog voltmeters/phasers
are designed to take voltage measurements and perform phasing
applications on system voltages up to 75kV. There are numerous versions
with single and multiple ranges for use on multiple system voltages.
These include one-stick models with a ground lead and two-stick models
with a connecting cord.
|
The NEW DigiVolt-80
is a compact, high accuracy dual stick voltmeter and phasing set with
connecting cord. The DVM-80 measures voltages up to 40kV and up to 80kV
with a pair of optional add-on resistors. The two-stick design can be
used in both overhead and underground applications. The DVM-80
incorporates Phase Accurate Technology, which makes all voltage
readings, whether made from line-to-line or line-to-ground, accurate and
repeatable to within 1%.
|
The Digital Voltage Indicator
(DVI) is a single point instrument designed to read the voltage on a
conductor up to 99kV line-to-ground. The large LED readout is
easy-to-read on the end of a long hotstick and can be used on overhead
lines or in underground applications with an optional probe
|
