|
For Ordering Information
Please call: 800-521-4088 or
Email: swainsales@swaindistribution.com
Voltage Detector and Phasing Voltmeter
81280 (300V - 25KV) 83280 (300V - 35KV)
Dual application design for use as voltage
detector or phasing voltmeter
Five-position switch controls different functions:
|
C - Indicates voltage on capacitive
test points
CP - Phases using capacitive test points
L - Detects voltage on overhead and underground lines
LP - Phasing on overhead lines
BT - Battery Test
|
Completely shielded to minimize stray field interference
Easy to read analog meter scale
3kV test device to verify unit and
accuracy
No extension resistors required
Optional adapters available for
underground use up to 35kV
Connector cable protected with clear
PVC covering
Watertight construction
Voltage Detector - VDA0300 / VDAH300 (0 - 300kV)
Widest voltage range (4kV
- 500kV) available in one voltage detector. Designed for use on overhead and
underground systems
|
|
Indicates approximate nominal or induced voltage in
line-to-ground values
|
|
|
Easy to read analog scale
|
|
|
Dual linear / logarithmic scale for better resolution
on 4kV systems
|
|
|
Requires no voltage scale selector switch or
multipliers
|
|
|
Hold and backlight functions available on VDAH300
|
|
|
Totally passive meter function
|
|
|
Optional adapters available for underground use up to
35kV
|
|
|
Watertight construction
|
Voltage Detector - VDA040P (0 - 40KV)
Dual application design. Detects
voltage both as a proximity or direct contact meter on overhead and underground
systems.
|
|
Five-position selector switch controls different
functions:
|
|
|
|
P - Indicates voltage in proximity to line
|
|
URD - Detects voltage on underground systems
|
|
OH - Detects overhead voltage 0 - 10kV
|
|
X4 - Detects overhead voltage 11 - 40kV
|
|
T - Tests and verifies meter function
|
|
|
|
Selector switch calibrated for height above ground to
compensate for capacitive coupling effect
|
|
|
Reads only contacted test point. Indicates
line-to-ground values for nominal or induced voltages
|
|
|
Easy to read analog scale
|
|
|
Over load protected up to 66.5kV (115kV phase-to-phase)
|
|
|
Completely shielded to minimize stray field interference
|
|
|
Optional adapters available for underground use up to
35kV
|
|
|
Watertight construction
|
Voltage Detector - VDA040C (0 - 40KV)
Multi-function design for voltage
detection on overhead and underground systems with ability to read capacitive
test points.
|
|
Five-position selector switch controls different
functions:
|
|
|
|
P - Indicates voltage in proximity to line
|
|
URD - Detects voltage on underground systems
|
|
OH - Detects overhead voltage 0 - 10kV
|
|
X4 - Detects overhead voltage 11 - 40kV
|
|
T - Tests and verifies meter function
|
|
|
|
Selector switch calibrated for height above ground to
compensate for capacitive coupling effect
|
|
|
Reads only contacted test point and indicates
line-to-ground values for nominal or induced voltages
|
|
|
Easy to read analog scale
|
|
|
Over load protected up to 66.5kV (115kV phase-to-phase)
|
|
|
Completely shielded to minimize stray field interference
|
|
|
Optional adapters available for underground use up to
35kV
|
|
|
Watertight construction
|
PD800W
Cordless Phasing Tester
Featuring
state-of-the-art wireless technology, the PD800W Cordless Phasing Tester
effectively and easily operates in multiple applications including phasing,
voltage detection, phase sequencing and phase angle indication.
The set is
designed to operate like a conventional phasing tester, but does not require
an interconnect cable. Each set consists of two units; a Reference Probe
(Transmitter) and a Meter Probe (Receiver).
BASIC FUNCTIONS
- Cordless
Phasing Tool - 208V - 800kV
- Phase
Sequence& Phase Angle Indicator - Identifies phase relationships
with indicating lights and in degrees of separation. Automatically alerts
user of the existence of Delta/Wye transformations. Can be used to tie
utility systems and cogeneration plants together.
- Voltage
Detector - 4kV - 69kV
- Operating
Range - 70 feet
| Cat. No. |
Description |
| PD800W |
Cordless
Phasing Tester |
The ability to
display the degree relationship between phases allows the PD800W to function as
a high voltage phase sequence indicator.
PD50 SERIES
DIGITAL PHASING VOLTMETER
The Safety Line
PD50 Series Digital Phasing Voltmeters are designed for measuring voltage and
phasing on overhead and underground systems. New to the PD50 series is the
PD50A, an identical meter to the PD50, but without the power supply included. It
is the most cost effective, accurate, and safest phasing voltmeter available
today, and can be used in a wide variety of applications.
BASIC FUNCTIONS:
- Digital
Phasing Voltmeter from 0 - 50kV
- Phasing on
Overhead, URD, Capacitive test points and 3 phase secondaries
- Line - Ground
voltage measurements across its range
- Lightning
Arrester Testing
- Voltage
regulator position verification
- DC High
Potential testing
- Cable splice
integrity verification
BENEFITS:
- Saves Money -
Replaces other more expensive models that provide the same
functions as stand alone units.
- Multifunctional
- When using the PD50A, only one meter is required on a line truck to
perform all the above functions.
- Multiple frequency voltage range (DC - 400Hz), true RMS.
- Accuracy - The
most accurate phasing meter available today (+/- 1% + 4 counts).
- Safety -
overload protected up to 60kV, interconnection cable fault limited to 0.5mA
if damaged.
- Ease of Use
- Replaceable standard 9V battery, with automatic shutoff after 20 minutes.
- Extended phasing distance (tested to 1,000 ft. interconnecting cable).
- Large LCD display with backlighting standard.
- Durability -
Rugged, watertight, impact resistant construction.
For more information about White Safety Line products, visit www.whitesafetyline.com/
Back to Tools
Main Page
| 